- Graphics card power supply using four solid capacitors, the video card power supply more stable and safe.
- Adapter card 4PIN + SATA + graphics card 6PIN interface, power plug an interface can work properly, so that the graphics card from the motherboard independent of the board, so as to reduce the motherboard board to pay more.
- Slot to the right to facilitate the 2U chassis wiring, graphics card slot using the original imported connector, video card and connector contact better.
- PCI-E connector with multi-layer shielded wire, the longest can be connected to 3M and not attenuate the signal.
- USB cable is soft and stable, easy to track, the graphics card can be placed.
- Slot with a fixed buckle, more convenient to remove the graphics and fixed graphics, graphics cards will not fall off from the slot.
- Wire using the current mining use the most stable manufacturers pumping the wire to ensure the integrity of the signal.
- The market’s USB cable, there is no woven shielded network, the quality of doing quite poor, so there will be very unstable phenomenon, please know. (Not all lines can be used to mine)
- Power cord with pure copper wire, in the mining to avoid burning line.
ITHOO USB3.0 PCIE 1X to 16X Graphics Card Extension Cable 60CM (red cable) with Multi-power Ports DC Power Cable for Mining motherboard
RM25.00
- This extension cable is suitable for the motherboard with PCI-E slot, please plug in the floppy drive power cord. Plug the PCI-E extension cable must be broken when the computer and then plug the wire, the use must be aware of the note!
- Supporting the wire is customized, please do not just find the line to plug in!
- Insert the line must be clear when the direction, do not plug or insert offset, to prevent burn equipment, plug the first device when the socket and then plug the line, to avoid excessive force socket socket interrupted.
- Dual-core graphics card with the old cable, the motherboard is also recommended 16X with the old cable.
20 in stock
Reviews
There are no reviews yet.