This document describes ValueRAM’s KVR21N15D8/16 is a 2G x
64-bit (16GB) DDR4-2133 CL15 SDRAM (Synchronous DRAM), 2Rx8,
memory module, based on sixteen 1G x 8-bit FBGA components. The
SPD is programmed to JEDEC standard latency DDR4-2133 timing of
15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
Kingston Desktop 16GB DDR4 2133MHZ CL15 Dimm Ram KVR21N15D8/16
RM708.00
- Power Supply: VDD=1.2V Typical
- VDDQ = 1.2V Typical
- VPP – 2.5V Typical
- VDDSPD=2.2V to 3.6V
- Nominal and dynamic on-die termination (ODT) for
- data, strobe, and mask signals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Dual-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- 16 internal banks; 4 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8via the mode register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- PCB: Height 1.23” (31.25mm)
- RoHS Compliant and Halogen-Free
Out of stock
Reviews
There are no reviews yet.